Postsecondary Pathways

After earning a certificate from any of our partner tech colleges, you may easily transfer to Weber State
using any one of our pathway agreements. 

STEP 1: Apply at Weber State as a transfer student.

STEP 2: Sign up for and participate in New Student Orientation.

STEP 3: Meet with an advisor either through a Weber Welcome event, or find your advisor online in your area of interest. You must meet with an advisor before registering for classes.

STEP 4: When you meet with an advisor, you must work with them to officially declare that you are pursuing an associate of applied science (AAS) degree at Weber State. This must be done in order for the coursework you've completed at a partner tech college to be added to your record.

Quick Jump to Pathway:

Automotive - ATEP
Automotive - Heavy Duty Truck
Chemical Technician
Computer Science
Construction Management
Cybersecurity and Network Management
Dental Hygiene
Digital Media
Electrician Apprenticeship
Health Information Technology
Health Science
Inside Wireman Apprenticeship
Management Information Systems
Manufacturing Engineering Technology
Nursing
Paramedic
Pre-Architecture
Product Design & Development
Plumbing Apprenticeship
Sales & Merchandising
Telecommunications Apprenticeship
Union Sheet Metal Apprenticeship
Web UI/UX
Welding

Automotive Pathway (ATEP)

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Independent Shop

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    AUTO 1010 Introduction and Safety 1 AUSV 1000 Intro to Automotive Service 2
    AUTO 2034 ASE Steering and Suspensions I 3 AUSV 1022 Steering and Suspension I 2
    AUTO 2035 ASE Steering and Suspensions II 4 AUSV 1025 Steering and Suspension II 2
    AUTO 2042 ASE Brakes System I 3 AUSV 1021 Braking System I 2
    AUTO 2043 ASE Brakes System II 3 AUSV 1023 Braking System II 2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • MTECH Pathway Agreement

    Mountainland Technical College to Weber State University: AAS Independent Shop ATEP

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    MTech Course MTech Name MTech Credit Hours WSU Course WSU Name WSU Credit Hours
    AUTO 0010 G1 Maintenance & Light Repair 5 AUSV 1000 Intro to Automotive Service 2
    AUTO 1102 A1 Engine Repair 5 AUSV 1120 Automotive Engines 1

    2
    AUTO 1116 A5 Brakes 4

    AUSV 1021

    AUSV 1023

    Auto Braking Systems 1

    Auto Braking Systems 2

    2

    2
    AUTO 1105 A4 Suspension and Steering 4

    AUSV 1022

    AUSV 1025

    Steering & Suspension 1

    Steering & Suspension 2

    2

    2
    AUTO 1117 A6 Electrical / Electronic Systems 4

    ASUV 1320

    AUSV 1323

    Automotive Electronics 1

    Automotive Electronics 2

    2

    2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Independent Shop

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    AUTO 1022 Electrical Fundamentals 2 AUSV 1320 Automotive Electronics I 2
    AUTO 1027 Electrical Diagnosis 2 AUSV 1323 Automotive Electronics II 2
    AUTO 1047 Engine Repair 2 AUSV 1120 Engines I 2
    AUTO 1012 Suspension & Steering Service 2 AUSV 1022 Suspension & Steering I 2
    AUTO 1002 Brakes Service 2 AUSV 1021 Braking Systems I 2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • Dixie Tech Pathway Agreement

    Dixie Technical College to Weber State University: AAS Independent Shop ATEP

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    Dixie Tech Course Dixie Tech Name Dixie Tech Credit Hours WSU Course WSU Name WSU Credit Hours
    AUTO 1010 Introduction to Automotive Technology 2 AUSV 1000 Intro to Automotive Service 2
    AUTO 1025 Electrical 1 4 AUSC 1320 Automotive Electronics I 2
    AUTO 1065 Automotive Engine Repair 2 AUSV 1120 Engines I 2
    AUTO 1075 Engine Perf and Drivability 4 AUSV 2020 Engine Control Systems 3
    AUTO 1025 Electrical 1 4 AUSV 1320 Automotive Electronics 1 2
    AUTO 2020 Electrical 2 2 AUSV 1323 Automotive Electronics 2 2
    AUTO 1045 Automotive Brake Systems 4

    AUSV 1021

    AUSV 1023

    Automotive Braking Systems 1

    Automotive Braking Systems 2

    2

    2
    AUTO 1055 Automotive Steering and Suspension 4

    AUSV 1022

    AUSV 1025

    Steering and Suspension 1

    Steering and Suspension 2

    2

    2
    AUTO 1095 Hybrid and EV 2 AUSV 1600 EV 1 Intro to Hybrid and Electric Vehicle Systems 2
    AUTO 2010 Automatic Transmissions 2 AUSV 2520 Automatic Transmissions 4
    AUTO 1085 Manual Transmissions Drivetrains 2 AUSV 1220 Auto Manual Drivetrain Systems 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • UBTech Pathway Agreement

    Uintah Basin Technical College to Weber State University: AAS Independent Shop ATEP

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    UBTech Course UBTech Name UBTech Credit Hours WSU Course WSU Name WSU Credit Hours
    TEAU 1080 Introduction to Automotive 2 AUSV 1000 Intro to Automotive Service 2
    TEAU 1400 Suspension & Steering 4

    AUSV 1022

    AUSV 1025

    Steering and Suspension 1

    Steering and Suspension 2

    2

    2
    TEAU 1500 Brakes 4

    AUSV 1021

    AUSV 1023

    Automotive Braking Systems 1

    Automotive Braking Systems 2

    2

    2
    TEAU 1600 Electrical I 4 AUSV 1320 Automotive Electronics 1 2
    TEAU 1115 Engine Repair I 2 AUSV 1120 Automotive Engines 1 2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • Bridgerland Pathway Agreement

    Bridgerland Technical College to Weber State University: AAS Independent Shop ATEP

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Bridgerland Course Bridgerland Name Bridgerland Credit Hours WSU Course WSU Name WSU Credit Hours
    AUTO 2010 General Automotive Services I 4 AUSV 1000 Intro to Automotive Service 2
    AUTO 2030 Electrical I 2 AUSV 1320 Automotive Electronics I

    2
    AUTO 2130 Advanced Engine Repair 2 AUSV 1120 Engines I

    2
    AUTO 2035 Electrical II 2 AUSV 1323 Automotive Electronics II 2
    AUTO 2060 Brakes 2 AUSV 1021 Brakes I 2
    AUTO 2050 Steering & Suspension 2 AUSV 1022 Steering I 2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Vehicle maintenance mechanic
  • Maintenance technician 
  • Automotive technician 
  • Automotive mechanic
  • Automotive service technician
  • Automotive sales and manager
  • Tire technician

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Automotive Pathway (Heavy Duty Truck)

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Heavy Duty Truck

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDT 1010 Introduction to Diesel Technology 2 AUSV 1000 Intro to Automotive Service 2
    TEDT 1300 Brakes 4 AUSV 1071 HD Truck Brakes 4
    TEDT 1200 Steering and Suspension 4 AUSV 1072 HD Truck Steering & Suspension 4
    TEDT 1610 Engine II 3 AUSV 2270 HD Truck Engines II 4
    TEDT 1400 Drivetrain 4 AUSV 1270 HD Truck Drivetrain 4
    TEDT 1100 Electrical I 4 AUSV 2170 HD Truck Electrical I 4
    TEDT 1600 Engines I 4 AUSV 1170 Truck Engines I 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • Dixie Tech Pathway Agreement

    Dixie Technical College to Weber State University: AAS Heavy Duty Truck

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    Dixie Tech Course Dixie Tech Name Dixie Tech Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDT 1010 Intro to Diesel Technology 2 AUSV 1000 Intro to Auto 2
    TEDT 1300 Brakes 4 AUSV 1071 HD Truck Brakes

    4
    TEDT 1200 Steering and Suspension 4 AUSV 1072 HD Truck Steering & Suspension

    4
    TEDT 1600 Engines I 4 AUSV 1170 HD Truck Engines I

    4
    TEDT 1400 Drivetrain 4 AUSV 1270 HD Truck Drivetrain

    4
    TEDT 1100 Electrical I 4 AUSV 2170 HD Truck Electrical I

    3
    TEDT 1610 Engines II 3 AUSV 2270 HD Truck Engine II 4
    TEDT 1500 PreventaLve Maintenance 1 AUSV 2370 HD PreventaLve Maintenance 1
    TEDT 1110 Electrical II 4 AUSV 2171 HD Truck Electrical II

    4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • MTECH Pathway Agreement

    Mountainland Technical College to Weber State University: AAS Heavy Duty Truck

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    MTECH Course MTECH Name MTECH Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDT 1010 Introduction to Diesel Technology 2 AUSV 1000 Intro to Automotive Service 2
    TEDT 1300 Brakes 4 AUSV 1071 HD Truck Brakes 4
    TEDT 1200 Steering and Suspension 4 AUSV 1072 HD Truck Steering and Suspension 4
    TEDT 1610 Engine II 3 AUSV 2270 HD Truck Engines II 4
    TEDT 1400 Drivetrain 4 AUSV 1270 HD Truck Drivetrain 4
    TEDT 1100 Electrical I 4 AUSV 2170 HD Truck Electrical I 4
    TEDT 1600 Engines I 4 AUSV 1170 Truck Engines I 4
    TEDT 1110 Electrical II 4 AUSV 2171 HD Truck Electrical II 4
    TEDT 1500 Preventative Maintenance I 1 AUSV 2370 Preventative Maintenance 1

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • UBTech Pathway Agreement

    Uintah Basin Technical College to Weber State University: AAS Heavy Duty Truck

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    UBTech Course UBTech Name UBTech Credit Hours WSU Course WSU Name WSU Credit Hours
    HVDD 1002 Introduction to HD Vehicles 2 AUSV 1000 Intro to Automotive Service 2
    HVDD 1007 Preventative Maintenance 2 AUSV 2370 Preventative Maintenance 1
    HVDD 1004 Electrical Systems I 2 AUSV 2170 HD Truck Electrical 1 4
    HVDD 2004 Electrical Systems II 2 AUSV 2270 HD Truck Electrical 2 4
    HVDD 1017 Suspension & Steering 2 AUSV 1072 HD Truck Steering & Suspension 4
    HVDD 1012 Commercial Vehicle Brakes 3 AUSV 1071 HD Truck Brakes 4
    HVDD 1014 Drive Train 3 AUSV 1270 HD Truck Drivetrain

    4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Vehicle maintenance mechanic
  • Maintenance technician 
  • Automotive technician 
  • Automotive mechanic
  • Automotive service technician
  • Automotive sales and manager
  • Tire technician

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Chemical Technician Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Chemical Technician

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEPT 1500 Pharmacy Technician Math 1 CHEM 1200 Preparation for College Chemistry 3
    TEPT 1110 Institutional Pharmacy Practice 3 CHEM 2600 Laboratory Safety 1

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Chemical Technician

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    PHMT 1015 Pharmacy Calculations 2 CHEM 1200 Preparation for College Chemistry 3
    PHMT 1160 Community Pharmacy 2 CHEM 2600 Laboratory Safety 1

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • Bridgerland Pathway Agreement

    Bridgerland Technical College to Weber State University: AAS Chemical Technician

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Bridgerland Course Bridgerland Name Bridgerland Credit Hours WSU Course WSU Name WSU Credit Hours
    TEPT 1100 Community Pharmacy Practice 3 CHEM 2600 Laboratory Safety 1
    TEPT 1210 Adv Institutional Pharmacy Practice 3 CHEM 1200 Preparation for College Chemistry 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Lab technician
  • Gas and chemical technician 

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Computer Science Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Computer Science

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEIT 1000 Information Technology Fundamentals 2 CS 1030 Foundations of Computing 4
    TESD 1400 Computer Programming 4 CS 1400 Programming I 4
    TESD 1800 Software Development 4 CS 1410 Object-Oriented Programming 4
    TESD 1100 Client-side Web Development 4 WEB 1430 Client Side Web Development 3
    TESD 1500 Database Development 4 CS 2550 Introduction to Database Design and SQL 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Computer Science

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TESD 1030 Foundations of Computing 4 CS 1030 Foundations of Computing 4
    TESD 1500 Database Development 4 CS 2550 Introduction to Database Design and SQL 4
    TESD 1100 Client-side Web Development 4 WEB 1430 Client Side Programming 3
    TESD 1400 Computer Programming 4 CS 1400 Programming I 4
    TESD 1800 Software Development 4 CS 2450 Software Engineering I 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Software development engineer
  • Full stack software engineer
  • Computer scientist

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Construction Management Pathway

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Construction Management

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDR 1108 Architectural CAD Modeling Interior Design 4 ARCH 1010 CA Into to Architecture 3
    TEDR 1035 Construction Materials and Methods 3 CM 1310 Material and Methods 4
    TEDR 1110 Introduction to Building Information Modeling 3 CM 2360 Commercial Design & Codes 3

    TEDR 1300

    TEDR 1310

    Civil Drafting

    Civil Design

    3

    4

    		 CM 2340 Civil Design and Layout 3
    TEDR 2181 Commercial Standards 4 ENGR 1040 Computer Aided Design and Codes 3
    TEDR 2100 Advanced BIM (Building Information Modeling) 4 CM 2260 MEP 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • Bridgerland Pathway Agreement

    Bridgerland Technical College to Weber State University: AAS Construction Management

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Bridgerland Course Bridgerland Name Bridgerland Credit Hours WSU Course WSU Name WSU Credit Hours

    TEDR 2110

    TEDR 1000

    Intermediate Architecture Drafting

    Technical Drafting

    4

    4

    		 ENGR 1040 Computer Aided Design 3
    TEDR 1010 Introduction to Carpentry 2 CM 1000 Introduction to Construction Management 1
    TEDR 1030 Construction Print Reading

    3

    		 CM 1150 Construction Graphics 3
    TEDR 1040 Advance Carpentry Concepts 4 CM 1310 Materials and Methods 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Construction Worker
  • Project Manager

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Cybersecurity & Network Management Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Cybersecurity and Network Management

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEIT 1200

    TEIT 1210

    A+ Core I

    A+ Core II

    3

    3

    		 CYBR 2200 Cybersecurity and System Fundamentals 3
    TEIT 2300 Linux+ 3 CYBR 2210 Linux System Administration 3

    TEIT 1170

    TEIT 2170

    Computing Networks I

    Computing Networks II

    2

    3

    		 CYBR 2300 Introduction to Networking and Cybersecurity 3

    TEIT 1160

    TEIT 1150

    Cisco CCNA Switching, Routing, and Wireless Essentials (SWRE)

    Cisco CCNA Introduction to Networks

    3

    3

    		 CYBR 2415 Cisco TCP/IP Routing Protocol 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Cybersecurity and Network Management

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEIT 1200

    TEIT 1210

    A+ Core I

    A+ Core II

    3

    3

    		 CYBR 2200 Cybersecurity and System Fundamentals 3
    TEIT 1670 Windows Administration 4 CYBR 2310 Network Server Administration 3
    TEIT 2300 Linux+

    3

    		 CYBR 2210 Linux System Administration 3

    TEIT 1170

    TEIT 2170

    Computing Networks I

    Computing Networks II

    2

    3

    		 CYBR 2300 Introduction to Networking and Cybersecurity 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Junior cybersecurity analyst
  • Information security analyst
  • Principal cyber security architect
  • Cyber security log operator

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Dental Hygiene Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AS Dental Hygiene

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEDE 1041

    TEDE 1100

    TEDE 1110

    Dental Materials

    Dental Anatomy

    Dental Radiology

    3

    2

    3

    		 DENT 2920 Short Courses and Special Programs 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AS Dental Hygiene

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEDE 1041

    TEDE 1100

    TEDE 1110

    Dental Materials

    Dental Anatomy

    Dental Radiology

    3

    2

    3

    		 DENT 2920 Short Courses and Special Programs 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • Bridgerland Pathway Agreement

    Bridgerland Technical College to Weber State University: AS Dental Hygiene

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Bridgerland Course Bridgerland Name BridgerlandCredit Hours WSU Course WSU Name WSU Credit Hours

    TEDE 1041

    TEDE 1100

    TEDE 1110

    Dental Materials

    Dental Anatomy

    Dental Radiology

    3

    2

    3

    		 DENT 2920 Short Courses and Special Programs 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Dental assistant
  • Orthodontic dental assistant
  • Dental hygienist
  • Traveling dental hygienist

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Digital Media Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AS/AA or AAS Digital Media

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEWG 2010

    TEWG 2015

    Digital Video I

    Digital Video II

    3

    3

    		 COMM 2550 Essentials of Digital Media 3

    TEWG 1310

    TEWG 1320

    Creative Branding

    Social Media Marketing

    1

    3

    		 COMM 2400 Social Media for Communicators 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AS/AA or AAS Digital Media Production

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDG 1300 Audio/Visual Editing

    3

    		 COMM 2550 Essentials of Digital Media 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Graphic designer
  • Digital media designer

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Electrician Apprenticeship

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Davis Technical College Weber State University

    Certification of Completion from Davis Technical College
    in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Ogden-Weber Technical College Weber State University
    Certification of Completion from Ogden-Weber Technical College in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

BECOME A...

  • Low voltage apprentice
  • Technology apprentice
  • Electrician

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Health Information Technology Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Health Information Technology

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEMC 1210

    TEMC 1220

    Medical Terminology and Anatomy I

    Medical Terminology and Anatomy II

    2

    2

    		 HTHS 1101 Medical Terminology 3
    TEMC 1140 Coding IV

    3

    		 HIMS 2320 Ambulatory & Physician Office Coding 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Health Information Technology

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEMC 1081

    TEMC 1082

    Medical Terminology and Anatomy/Physiology I

    Medical Terminology and Anatomy/Physiology II

    3

    3

    		 HTHS 1101 Medical Terminology 3
    TEMC 1140 Coding IV

    3

    		 HIMS 2320 Ambulatory & Physician Office Coding 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Health information management technician 
  • Medical record collector 
  • Health information clerk

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Health Science Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AS Health Science

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEMA 1083 Medical Terminology for Medical Assistant

    2

    		 HTHS 1101 Medical Terminology 2
    TEMA 1040 Anatomy and Physiology

    2

    		 HTHS 1104 Intro to Anatomy and Physiology 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AS Health Sciences

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEMA 1083 Medical Terminology for Medical Assistants

    2

    		 HTHS 1101 Medical Terminology 2
    TEMA 1040 Anatomy and Physiology

    2

    		 HTHS 1104 Intro to Human Anatomy and
    Physiology    		 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Mental health clinician 
  • Pharmacist 
  • EMT (paramedic)
  • Health science specialist 
  • Health science instructor 
  • Lab aide health science

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Inside Wireman Apprenticeship  

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Ogden-Weber Technical College Weber State University
    Certification of Completion from Ogden-Weber Technical College in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

BECOME A...

  • Commercial electrician
  • Residential electrician

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Management Information Systems  

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AS Management Information Systems

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEBP 1140 Spreadsheets

    2

    		 MIS 2010 Business Computer Skills 1

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AS Management Information Systems

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEBP 1140 Spreadsheets

    2

    		 MIS 2010 Business Computer Skills 1

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Data Analyst
  • IT Project Management
  • Business Analyst

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Manufacturing Engineering Technology Pathways

 

  • DTC Pathway Agreement - CNC Machining

    Davis Technical College to Weber State University: AAS Manufacturing Engineering Technology - CNC Machining

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    MACH 1010

    MACH 1023

    Lathe Operation I

    Vertical Mill Operation I

    3

    3

    		 MFET 1210 Machining Principles 3

    MACH 1200

    MACH 1300

    CNC Milling I

    CNC Turning I

    2

    2

    		 MFET 2440 MFET 2440L CNC in Manufacturing and Lab 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement - CNC Machining

    Ogden-Weber Technical College to Weber State University: AAS Manufacturing Engineering Technology - CNC Machining

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEMT 1000

    TEMT 1200

    TMET 2000

    TEMT 1100

    Manufacturing Fundamentals

    Lathe Concepts

    Process Control

    Mill Concepts

    3

    3

    3

    3

    		 MFET 1210 MFET 1210L Machining Principals and Lab 3

    TEMT 1150

    TEMT 1300

    TEMT 1250

    TEMT 1350

    CNC Milling Concepts

    CNC Mill Programming

    CNC Lathe Concepts

    CNC Lathe Programming

    3

    3

    3

    3

    		 MFET 2440 MFET 2440L CNC Machining and Lab 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • DTC Pathway Agreement - Production Operations and Control Concentration

    Davis Technical College to Weber State University: AAS Manufacturing Engineering Technology - Production Operations and Control Concentration

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEAM 1070

    TEAM 1110

    Programmable Logic Controllers

    Introduction to Industrial Robotics

    4

    2

    		 MFET 2510 Process Automation Lab 2
    TEAM 1015 Electronic Fundamentals for Industrial Automation 4 MFET 1820 Manufacturing Electricity and Electronics 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • DTC Pathway Agreement - Automation

    Davis Technical College to Weber State University: AAS Manufacturing Engineering Technology - Automation Emphasis

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    IAMT 2000

    IAMT 2010

    IAMT 2027

    Programmable Logic Controllers I

    Human Machine Interface (HMI) Programming

    Industrial Robotics

    90/3

    90/3

    90/3

    		 MFET 2510 Process Automation Lab 2
    IAMT 1000 Electronic Fundamentals for Industrial Automation 120/4 MFET 1820 Manufacturing Electricity and Electronics 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Machinist 
  • Machining production manager 
  • Machine programmer

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Nursing Pathway

 

  • Bridgerland Pathway Agreement

    Bridgerland Technical College to Weber State University: AAS/AS Nursing Degree

    July 1, 2025 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    Bridgerland Course Bridgerland Name Bridgerland Credit Hours WSU Course WSU Name WSU Credit Hours

    NRSG 1011

    NRSG 1021

    NRSG 1031

    NRSG 1041

    NRSG 2051

    NRSG 2061

    NRSG 2071

    NRSG 2082
    • Fundamentals of Nursing
    • Caring for the Client Drug Therapy
    • Human Workplace Relations
    • Clinical Applications I
    • Caring for the Adult
    • Caring for New Family
    • Employment Prep
    • Clinical Application II
    • 7
    • 2
    • 1
    • 3
    • 4
    • 3
    • 1
    • 4
    		 N/A When all 900 clock hours are completed, students will receive 18 of PN-Nursing credits at Weber State University 18

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS/AS Nursing Degree

    July 1, 2025 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    NRSG 1005

    NRSG 1025

    NRSG 1030

    NRSG 1031

    NRSG 1040

    NRSG 1052

    NRSG 1053

    NRSG 1060
    • Nursing Foundation
    • Nursing Care of Diverse Populations
    • Fundamentals of Nursing Care Practice
    • Fundamentals of Nursing Care Practice (Clinical)
    • Principles of Nursing across the Lifespan
    • Patient-Focused Care
    • Patient-Focused Care (Clinical)
    • Pharmacological Nursing Care
    • 2
    • 2
    • 3
    • 4
    • 4
    • 4
    • 4
    • 3
    		 N/A When all 26 credits are completed at Davis Technical College, students will receive 18 of PN-Nursing credits at Weber State University. 18

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS/AS Nursing Degree

    July 1, 2025 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    NRSG 1020

    NRSG 1040

    NRSG 1030

    NRSG 1270

    NRSG 1320

    NRSG 2020

    NRSG 2030

    NRSG 2040

    NRSG 2270

    NRSG 2310

    NRSG 2410

    NRSG 2420

    NRSG 2430
    • Fundamentals of Nursing Practice
    • Fundamentals of Nursing Practice Clinical
    • Fundamentals of Nursing Practice Lab
    • Introduction to Nursing Pharmacology
    • Comprehensive Mental Health Nursing
    • Medical-Surgical Nursing Care
    • Medical-Surgical Nursing Care Lab
    • Medical-Surgical Nursing Care Clinical
    • Nursing Pharmacology II
    • Pathway to Nursing Practice
    • Family Nursing Care
    • Family Nursing Care Lab
    • Family Nursing Care Clinical
    • 4
    • 2
    • 4
    • 2
    • 2
    • 4
    • 1
    • 1
    • 2
    • 1
    • 4
    • 1
    • 1
    		 N/A When all credits are completed, students will receive 18 of PN-Nursing credits at Weber State University 18

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Registered nurse
  • Outpatient registered nurse
  • Clinical Nurse

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Paramedic Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Paramedic Studies

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Wasatch Front North Region

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEEM 1111 Emergency Medical Technician

    6

    PAR 1000

    PAR 1001

    Emergency Medical Technician

    Emergency Medical Technician Lab

    4

    2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Firefighter
  • Paramedic

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Pre-Architecture Pathway

 

  • Bridgerland Pathway Agreement

    Bridgerland Technical College to Weber State University: AAS Pre-Architecture

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Wasatch Front North Region

    Bridgerland Course Bridgerland Name Bridgerland Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDR 1000 Technical Drafting

    4

    		 ID 1050 Architectural Drafting

    3

    TEDR 1110

    TEDR 1130

    Intro to Building Information Modeling

    Commercial Drafting

    3

    3

    		 CM 2360 Commercial Design & Codes 3
    TEDR 2110 Intermediate Architectural Drafting 4 ARCH 2000 Architectural Design Communication II 3
    TEDR 1100 Residential Drafting 3 ARCH 1350 Architectural Design Communication I 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Pre-Architecture

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDR 1000 Technical Drafting

    4

    		 ID 1050 Architectural Drafting

    3
    TEDR 1035 Construction Materials & Methods

    3

    		 CM 1310 Materials and Methods 4
    TEDR 1108 Architectural CAD Modeling Interior Design 4 ARCH 1040 CA Intro to Architecture 3

    TEDR 1100

    TEDR 2181

    Intro to Building Information Modeling

    Commercial Standards

    3

    4

    		 CM 2360 Commercial Design & Codes 3
    TEDR 1120 Residential Architecture Design 4 ARCH 2000 Architectural Design Communication II 3

    TEDR 1300

    TEDR 1310

    Civil Drafting

    Civil Design

    3

    4

    		 CM 2340 Civil Drafting and Layout 3
    TEDR 1100 Residential Drafting 3 ARCH 1350 Architectural Design Communication I 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Pre-Architecture

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDR 1010 Advanced Technical Drafting

    3

    		 ARCH 1040 CA Intro to Architecture

    3
    TEDR 1000 Technical Drafting

    4

    		 ID 1050 Architectural Drafting 3
    TEDR 1100 Residential Drafting 3 ARCH 1350 Architectural Design Communication I 3
    TEDR 1110 Introduction to Building Information Modeling

    3

    		 ARCH 2000 Architectural Design Communication II 3

    TEDR 1135

    TEDR 1136

    Commercial Drafting I

    Commercial Drafting II

    2

    3

    		 CM 2360 Commercial Design & Codes 4

    TEDR 1030

    TEDR 1031

    Materials and Methods I

    Materials and Methods II

    2

    2

    		 CM 1310 Materials & Methods 4

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Mechanical engineer
  • Mechanical HVAC engineer
  • Mechanical design engineer
  • Architectural engineer
  • Energy engineer
  • Architectural & engineer manager
  • Building performance analyst
  • Commissioning engineer
  • High-Performance consultant

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Product Design & Development Pathway

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Product Design & Development

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEDR 1200 Parametric and Solid Modeling

    3

    		 PDD 1010 Introduction to Engineering & Technical Design (Solidworks)

    3
    TEDR 1220 Production Drafting

    4

    		 PDD 1160 Geometric Dimensions & Tolerancing Using 3D CAD 3

    TEDR 1270

    TEDR 2200

    Metal Processing

    Advanced Solid Modeling

    3

    3

    		 PDD 2460 Product Design Fundamentals Using 3D CAD 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Product Design & Development

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEDR 1200

    TEDR 1222

    Parametric and Solid Modeling

    Product Drafting II

    3

    2

    		 PDD 1010 Introduction to Engineering and Technical Design (Solidworks)

    3
    TEDR 1230 Reverse Engineering

    3

    		 PDD 2650 Product Design and Development 3
    TEDR 2200 Advanced Solid Materials

    3

    		 PDD 2460 Product Design Fundamentals Using 3D CAD 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Civil engineer associate
  • Structural engineer
  • Director of product design and development

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Plumbing Apprenticeship

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Wasatch Front North Region

    Davis Technical College Weber State University

    Certification of Completion from Davis Technical College
    in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Wasatch Front North Region

    Ogden-Weber Technical College Weber State University
    Certification of Completion from Ogden-Weber Technical College in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

BECOME A...

  • Plumber
  • Plumber apprentice

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Sales & Merchandising Pathway

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Sales and Merchandising

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    OWTC Course OWTC Name OWTC Credit Hours WSU Course WSU Name WSU Credit Hours

    TEBP 1750

    TEBP 1150

    Sales Fundamentals

    Presentations

    2

    2

    		 PS 1143 Principles of Selling and Persuasion

    3

    TEBP 1200

    TEBP 2750

    Professionalism

    Customer Relationship Management

    3

    2

    		 PS 1403 Intro to Customer Care 3
    TEBP 1700 Marketing I

    3

    		 PS 1303 Sales Channels 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Sales executive
  • Car salesman
  • Retail sales professional

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Telecommunications Apprenticeship Pathway

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Wasatch Front North Region

    Ogden-Weber Technical College Weber State University
    Certification of Completion from Ogden-Weber Technical College in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

BECOME A...

  • Telecommunication repair engineer

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Union Sheet Metal Apprenticeship Pathway

 

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Construction Apprenticeship

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    Wasatch Front North Region

    Ogden-Weber Technical College Weber State University
    Certification of Completion from Ogden-Weber Technical College in a construction apprenticeship program.

    Students will receive 40 hours of elective credits at
    Weber State University toward the AAS Construction
    Apprenticeship Degree.

    Program Overview

    The Associate of Applied Science (AAS) in Construction Apprenticeship is designed to bridge the gap between technical training and construction management. This program provides apprentices and journeymen with the education and skills needed to transition into leadership and management positions within their trade. The degree also helps reduce the time required to achieve master-level certification by integrating professional experience with academic coursework.

    Elective Credit Award

    Students are eligible to receive 40 hours of elective credit toward the AAS in Construction Apprenticeship degree at Weber State University upon completion of the following:

    • Certificate of Program Completion from the technical college
    • Admission into the construction apprenticeship degree program at Weber State University

    Program Requirements

    Program Prerequisite
    Students must hold one of the following credentials:

    • Journeyman’s License
    • Certificate of Completion from the Office of Apprenticeship (OA)
    • Certificate of Completion from a post-secondary institution offering an OA-certified program
     

    Grade Requirements
    Students must maintain a minimum GPA of 2.00 (C) and earn a “C” or better in all core and elective courses. A grade of “C-” does not meet requirements.

    Credit Hour Requirements
    A minimum of 63 total credit hours is required for graduation, including:

    • 20 credit hours completed in WSU residency courses
    • 40 transfer credit hours awarded for completion of a certified Office of Apprenticeship program

BECOME A...

  • Sheet metal fabricator
  • HVAC engineer

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Web and User Experience (UX) Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Web and User Experience

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TEWG 1020 Digital Image Editing with Raster Graphics

    3

    WEB 2200

    		 Image Editing

    3
    TEWG 1030 Digital Illustration with Vector Graphics 3 WEB 2210 Computer Illustrations 3
    TEWG 1040 Introduction to Web Design with HTML and CSS 2 WEB 1400 Web Design and Usability 3
    TEWG 1050 Responsive Web Design with Advanced HTML and CSS 3 WEB 2620 Advanced CSS 3
    TEWG 1060 Introduction to UX/UI Design 3 WEB 2500 User Experience Design 3
    TEWG 1130 Digital Video I 3 WEB 2300 Video Editing 3
    TEWG 1180 Modern JavaScript 3 WEB 1430 Client Side Programming 3

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Graphic designer
  • Web designer

STARTING POINT:

COMPLETE WITH A:

 

Back to the top

Welding Pathway

 

  • DTC Pathway Agreement

    Davis Technical College to Weber State University: AAS Manufacturing Engineering Technology - Welding Emphasis

    July 1, 2024 to June 30, 2026

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    WELD 1315 Gas Metal Arc Welding I 60/2 MFET 2153 Metal Welding Lecture/Lab 1

    WELD 1415

    WELD 1325

    WELD 1601

    WELD 1610

    WELD 1426

    Flux Cored Arc Welding I

    Gas Metal Arc Welding II

    Gas Tungsten Arc Welding I

    Gas Tungsten Arc Welding II

    Flux Cored Arc Welding II

    60/2

    60/2

    60/2

    60/2

    60/2

    MFET 2670

    MFET 2670L
    • FCA and GTA Welding
    • FCA and GTA Welding GMA, FCA and GTA Welding
    • 1
    • 2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

  • OWTC Pathway Agreement

    Ogden-Weber Technical College to Weber State University: AAS Manufacturing Engineering Technology - Welding Emphasis

    July 1, 2025 to June 30, 2027

    This guide is subject to change and should be used in consultation with an academic advisor.

    DTC Course DTC Name DTC Credit Hours WSU Course WSU Name WSU Credit Hours
    TWET 1311 Gas Metal Arc Welding (GMAW) I 2 MFET 2153 Welding Lecture/Lab 1

    TWET 1312

    TWET 1411

    TWET 1412

    TWET 1211

    TWET 1212

    Gas Metal Arc Welding (GMAW) II

    Flux Cored Arc Welding (FCAW) I

    Flux Cored Arc Welding (FCAW) II

    Gas Tungsten Arc Welding (GTAW) I

    Gas Tungsten Arc Welding (GTAW) II

    2

    2

    2

    2

    2

    MFET 2670

    MFET 2670L

    GMA, FCA and GTA Welding

    GMA, FCA and GTA Lab

    1

    2

    Assurances: This agreement is in effect only when all criteria and conditions of the Career Pathways Program and Student have been met. Selection criteria must be met for acceptance into each postsecondary program. Program requirements from either partner may change without notice.

    • Students will be accepted into the postsecondary portion of the program according to application criteria.
    • Dual and concurrent enrollment and other credit transfer options are well defined between secondary and post secondary partners.
    • Compliance with approved Board policies.

BECOME A...

  • Welder
  • Manufacturing technician
  • Principal manufacturing engineer

STARTING POINT:

COMPLETE WITH A:

 

Back to the top