SLCC Articulation: Manufacturing Engineering Technology: Welding
Accepted Courses from SLCC to Weber State University
Salt Lake Community College
Manufacturing Engineering Technology Prerequisites
Complete the Following Courses and/or Equivalents at SLCC
| Course Number | Course Name | Credit Hours |
|---|---|---|
| ENGL 1010 | Intro to Writing | 3 |
| ENGL 2010 | Intermediate Writing | 3 |
| COMM 2110 | Interpersonal Communications | 3 |
| ECON 1010 | Economics as a Social Science | 3 |
| CSIS 1020 | Computer Essentials | 3 |
Complete the Following Courses
| Course Number | Course Name | Credit Hours |
|---|---|---|
| EDDT 1010 | *Technical Drafting I† | 3 |
| EDDT 2600 | *Modeling with SolidWorks (1010 Prereq)† | 3 |
| or | ||
| MEEN 1000 | *Intro to Design In Engr Systems (MEEN 1005 coreq) | 3 |
| EDDT 1200 | Technical Drafting II (1010 and 1100 prereq)† | 4 |
| EDDT 2540 | Geometric Dim & Tolerancing (1040 prereq)† | 2 |
| EDDT 2700 | Advanced SolidWorks | 2 |
| EET 1140 | AC and DC Circuits | 4 |
| MCCT 1500 | Manual Machining and Lab (MCCT 1510 coreq) | 3 |
| EDDT 2340 | Manufacturing Processes (EDDT 2350 coreq)† | 2 |
| EDDT 2350 | Manufacturing Processes Lab (EDDT 2340 coreq)† | 1 |
| WLD 1005 | Related Welding† | 3 |
| EDDT 2160 | *Statics &Strength of Materials | 5 |
| or | ||
| ENGR 2140 | *Strength of Materials† | 2 |
| ENGR 2010 | *Statics† | 3 |
| MATH 1040 | Intro to Statistics | 3 |
| WLD 1230 | Gas Shield Weld Inspection† | 3 |
| WLD 1231 | Gas Shield Weld Inspection Lab† | 7 |
| WLD 1240 | Flux Core, Pipe Fabrication† | 3 |
| WLD 1241 | Flux Core, Pipe Fabrication Lab† | 7 |
Select 1 Course from the Following
| Course Number | Course Name | Credit Hours |
|---|---|---|
| ECON 1740 | ECON History of US | 3 |
| HIST 1700 | American Civilization | 3 |
| POLS 1100 | US GOVT & Politics | 3 |
Complete the Following Courses
| Course Number | Course Name | Credit Hours |
|---|---|---|
| MATH 1080 | Pre-Calculus (or MATH 1050 AND 1060 | 5 |
| MATH 1210 | Calculus I | 4 |
Complete the Following Courses
| Course Number | Course Name | Credit Hours |
|---|---|---|
| CHEM 1110 | Elementary Chemistry | 4 |
| CHEM 1115 | Elementary Chemistry Lab | 1 |
| PHY 2010 | *College Physics I | 4 |
| PHY 2015 | *College Physics I Lab | 1 |
| or | ||
| PHY 2210 | *Physics for Sci & Engr I | 4 |
| PHY 2215 | *Physics for Sci & Engr I Lab | 1 |
Select 1 Course from the Following Areas (1 must also be a Diversity-DV-course)
| Course | Credit Hours | |
|---|---|---|
| Fine Arts (FA) Dance 1010 recommended (Fulfills DV) | 3-4 | |
| Humanities (HU) Comm 2110 Fufills this requirement | 3 | |
| Interdisciplinary (ID) | 3 | |
| Social Science (SS) | 3 | |
| Life Science (LS) | 3 | |
| Lifelong Wellness (LW) | 1 | |
*Symbolize courses that have more than one option
† Symbolize courses that have and option
Minimum credits required for AA/AS: 60+
Please consult with your SLCC Advisor for any additional required/elective credits needed to fulfill all necessary requirements for an AS Degree.
Weber State University
Bachelors of Manufacturing Engineering Technology Program
Manufacturing Engineering Technology Welding Emphasis
Complete the Following Courses and/or Equivalents at WSU
Semester 1
| Course Number | Course Name | Credit Hours |
|---|---|---|
| MFET 3060 | Codes, Weld Inspection, & Quality Assurance | 3 |
| MFET 3550 | Manufacturing Supervision | 3 |
| MFET 3630 | Fusion Joining and Brazing Processes | 2 |
| MFET 3630L | Fusion Joining and Brazing Processes Lab | 1 |
| Incorporate Technical Electives | ||
Semester 2
| Course Number | Course Name | Credit Hours |
|---|---|---|
| MFET 3750 | Welding Metallurgy I | 2 |
| MFET 3750L | Welding Metallurgy I Lab | 1 |
| MFET 3760 | Welding Metallurgy II | 2 |
| MFET 3760L | Welding Metallurgy II Lab | 1 |
| MFET 3810 | Statistical Process Control & Reliability | 3 |
| MFET 3820 | Nondestructive Testing | 3 |
| Incorporate Technical Electives | ||
Semester 3
| Course Number | Course Name | Credit Hours |
|---|---|---|
| MFET 3910 | Six Sigma Methods & Tools in Manufacturing | 4 |
| MFET 4090 | Welding Power Sources | 2 |
| MFET 4315 | Welding Robotics | 2 |
| MFET 4580 | Process Automation | 1 |
| MFET 4580L | Process Automation Lab | 2 |
| Incorporate Technical Electives | ||
Semester 4
| Course Number | Course Name | Credit Hours |
|---|---|---|
| MFET 4590 | Planning & Process Control | 3 |
| MFET 4610 | Senior Project Planning & Estimating | 3 |
| MFET 4610L | Senior Project Lab | 2 |
| MFET 4620L | Senior Project Lab | 2 |
| MFET 4995 | Certified Manufacturing Technologist (CMfgT) Exam Review | 1 |
| Incorporate Technical Electives | ||
Please consult with your WSU Advisor regarding additional required/elective credits needed to fulfill all necessary requirements for a BS Degree.
| Source | Credit Hours | |
|---|---|---|
| Transfer Credits from SLCC | 60+ | |
| Total SLCC & WSU Credits | 120+ | |
SLCC to WSU Credit Conversion Chart
| SLCC | WSU | |||||
| EDDT 1010 | 1010 | Technical Drafting I | 3 | DET 1010 | Intro to Engineering & Technical Design | 3 |
| and EDDT | 2600 | Modeling with Solidworks (1010 prereq) | 3 | |||
| or MEEN | 1000 | Intro to Design In Engr Systems (MEEN 1005 coreq) | 3 | DET 1010 | Intro to Engineering & Technical Design | |
| EDDT | 1200 | Technical Drafting II (1010 and 1100 prereq) | 4 | DET 1160 | Geo Dimension & Tolerance using 3D CAD | 3 |
| and EDDT | 2540 | Geometric Dim & Tolerancing | 2 | |||
| EDDT | 2700 | Advanced Solidworks | 2 | DET 2460 | Product Design Fundamentals 3D CAD | 3 |
| EET | 1140 | AC and DC Circuits | 4 | EET 1850 | Industrial Electronics | 4 |
| Geometric Dimension & Tolerance (1040 prereq) | ||||||
| MCCT | 1500 | Manual Machining and Lab (MCCT 1510 coreq) | 3 | MFET 1210 | Machining Principles | 3 |
| EDDT | 2340 | Manufacturing Processes (EDDT 2340 coreq) | 2 | MFET 2150 & 2150L | Metal Forming, Casting and Welding | 2 |
| and EDDT | 2350 | Manufacturing Processes Lab (EDDT 2350 coreq) | 1 | |||
| and WLD | 1005 | Related Welding | 3 | |||
| EDDT | 2160 | Statics and Strength of Matls | 5 | MFET 2300 | Statics and Strength of Materials | 5 |
| or ENGR | 2140 | Strength of Materials | 2 | MFET 2300 | Statics and Strength of Materials | 5 |
| and ENGR | 2010 | Statics | 3 | |||
| MATH | 1040 | Intro to Statistics | 3 | MFET 2410 | Quality Concepts & Statistical Applications | 3 |
| WLD | 1230 | Gas Shield Weld Inspection | 3 | MFET 2670 & 2670L | GMA, FCA, and GTA Weld/Lab (rqd for BS) | 3 |
| and WLD | 1231 | Gas Shield Weld Inspection Lab | 7 | |||
| and WLD | 1240 | Flux Core, Pipe Fabrication | 3 | |||
| and WLD | 1241 | Flux Core, Pipe Fabrication Lab | 7 | |||
| CHEM | 1110 | Elementary Chemistry and Lab | 5 | CHEM 1110 | Elementary Chemistry and Lab | 5 |
| COMM | 2110 | Interpersonal Communication | 3 | COMM 2110 | Interpersonal & Small Group Comm. | 3 |
| ECON | 1010 | Economics as a Social Science | 3 | ECON 1010 | Economics as a Social Science | 3 |
| MATH | 1080 | Pre-Calculus (or MATH 1050 AND 1060) | 5 | MATH 1080 | Pre-Calculus (or MATH 1050 AND 1060) | 5 |
| MATH | 1210 | Calculus I | 4 | MATH 1210 | Calculus I | 4 |
| PHYS | 2010 | College Physics I and Lab or | 5 | PHYS 2010 | College Physics I and Lab or | 5 |
| or PHYS | 2210 | Physics for Scientist and Engineers I and Lab | 5 | or PHYS 2210 | Physics for Scientist and Engineers I and Lab | 5 |
This is only a recommended transfer articulation guide and should only be used as such. To avoid mis-advisement please consult with both your SLCC & WSU Advisor for further information.
Contact us for more information
College of Applied Science & TechnologyPhone: 1-801-626-6305 E-mail: wendibirch@weber.edu
Contact your Advisor
Pat DeJongPhone: 1-801-626-6318
E-mail: patriciadejong@weber.edu
Website: https://www.weber.edu/et Mark Baugh
Phone: 1-801-626-7540
E-mail: mbaugh@weber.edu
Website: https://www.weber.edu/et