Bachelor of Science, Manufacturing Engineering Technology

Program Prerequisite

Complete the requirements for the AAS Degree in Manufacturing Engineering Technology, Welding Emphasis.

Minor
 
Not required.
 
Grade Requirements
 
A grade of "C" or better in all MfET courses, support courses, and technical electives is required for this major (a grade of "C-" is not acceptable) in addition to an overall GPA for all courses of 2.0 or higher. Also refer to the general grade requirements for graduation under General Requirements.
 
Credit Hour Requirements
 
A total of 125 credit hours for the general Manufacturing Engineering Technology BS degree and 126 credit hours for the Welding Engineering Technology Emphasis BS degree are required for graduation. A total of 40 upper-division credit hours is also required (courses numbered 3000 and above). Transfer students are required to take a minimum of 30 credit hours at Weber State University.

Advisement

All Manufacturing Engineering Technology and Welding Engineering Technology Emphasis students are required to meet with their faculty advisor at least annually for course and program advisement. Please call the department secretary at 801-626-6305 for the name of your advisor and to schedule an appointment. 

Admission Requirements

Declare your program of study.  Refer to the Program Prerequisite above.  There are no additional special admission or application requirements for this program.

General Education

Refer to the General Education Requirements for Bachelor of Science degrees. Consult with your advisor for specific general education guidelines.

Manufacturing Engineering Technology
Course Requirements for BS Degree

To be taken in addition to the courses required for the AAS Degree in Manufacturing Engineering Technology.

Manufacturing Engineering Technology Courses Required
(45 credit hours)

  • MfET 3010 Tool Design (3)
  • MfET SI3310/3310L Material Selection & Heat Treat (3)
  • MfET 3320 Machine Design (2)
  • MfET 3340/3340L Applied Fluid Power (3)
  • MfET 3350/3350L Plastic & Composite Manufacturing (4)
  • MfET 3550 Manufacturing Supervision (3)
  • MfET 3610/3610L Machining Processes II (3)
  • MfET 3710/3710L Computer Aided Manufacturing and Rapid Prototyping (3)
  • MfET 3810 Statistical Process Control and Reliability (3)
  • MfET 3910 Six Sigma Methods and Tools in Manufacturing (5)
  • MfET 4580/4850L Process Automation (3)
  • MfET 4610 Senior Project Production Planning and Estimating (5)
  • MfET 4610L Senior Project Lab (2)
  • MfET 4620L Senior Project Lab (2)
  • MfET 4995 Certified Manufacturing Technologist (CMfgT) Exam (1)

Technical Electives for the Manufacturing Engineering Technology BS degree

A minimum of 3 credit hours of technical electives chosen from the following list are required.
 
Note: The Computer and Design Graphics Technology Program is undergoing a name change to Design Graphics Engineering Technology. Program courses are listed in the current WSU Course Catalog with the abbreviation CDGT; after the change, they will be listed as DGET.
  • CDGT 3470 Applications in CAD (3)
  • MfET 3460/3460L Engineering Design using Solid Modeling (3)
  • MfET SI4600 Manufacturing Simulation (2)
  • MfET 3890 or MfET 4890 Cooperative Work Experience (3)
  • SST 4102 Developing Team Leadership (2)
  • Other classes approved by your MfET advisor

Suggested Course Sequence for the Manufacturing Engineering Technology BS Degree

The following suggested course sequence is provided to assist students in planning their schedules. Use this only as a guideline and be sure to consult with your advisor.

Freshman Fall

Freshman Spring

MfET 1210/L

3

MfET 1150

1

CDGT 1250

3

CDGT 1260

3

Computer & Information
Literacy Exams or Courses

2/4

Engl EN2010

3

Engl EN1010

3

Math SI1210

4

Math QL1080

5

Chem PS/SI1110

5

Total Hours

16

Total Hours

16

 

Sophomore Fall

Sophomore Spring

MfET 2150/L

4

MfET SI2300

5

CDGT 2450

2

MfET SI2440/L

3

Econ SS1010

3

MfET SI2410

3

Comm HU1050

3

Gen Ed HU

3

Phsx PS/SI2010 or 2210

5

CEET 1110

2

Total Hours

17

Total Hours

16

 

Junior Fall

Junior Spring

MfET 3320

2

MfET SI3310/L

3

MfET 3340/L

3

MfET 3910

5

MfET 3350/L

4

MfET 3710/L

3

MfET 3010

3

MfET 3550

3

MfET 3810

3

 MfET 3610/L

3

Total Hours

15

Total Hours

17

 

Senior Fall

Senior Spring

MfET 4580/L

3

MfET 4620L

2

MfET 4610

5

MfET

3

MfET 4610L

2

MfET 4995

1

Hist 1700

3

Gen Ed SS

3

Gen Ed LS

3

Gen Ed CA/HU

3

Total Hours

16

Total Hours

12

Source: 2004-2005 WSU Course Catalog. Refer to the current course catalog for course descriptions. 

This curriculum pattern is subject to revision and is not an academic contract. See your advisor to make sure you are choosing the proper courses.

Translate

Weber State University

Ogden, Utah 84408